>
Electro valve/ Capex
Cours gratuits > Forum > Forum anglais: Questions sur l'anglais || En basElectro valve/ Capex
Message de taranghiano77 posté le 14-05-2013 à 10:21:10 (S | E | F)
Bonjour,
Pourriez-vous s'il vous plait me confirmer que le texte suivant est bien correct (courriel) ?
Merci d'avance
Dear XXXX,
Consumption of LUBRICANT is very high and I suppose that's due to the malfunction of the electrovalve in section 5 and 6 which are all the time open and the wrong time setting of electro valve 1; 2 and 3.
On my last visit report I proposed a new installation and I calculated the pay back terms. This installation will be paid back in a short period and you will get a significant water saving as well.
Furthermore I know that mr John proposed, at the corporate level, to grant 6000 euro from the CAPEX 2013 for a new lubrication dosing system. Did you receive any feedback about that ?
Could we go ahead with this project ?
Best regards,
-------------------
Modifié par lucile83 le 14-05-2013 14:18
Message de taranghiano77 posté le 14-05-2013 à 10:21:10 (S | E | F)
Bonjour,
Pourriez-vous s'il vous plait me confirmer que le texte suivant est bien correct (courriel) ?
Merci d'avance
Dear XXXX,
Consumption of LUBRICANT is very high and I suppose that's due to the malfunction of the electrovalve in section 5 and 6 which are all the time open and the wrong time setting of electro valve 1; 2 and 3.
On my last visit report I proposed a new installation and I calculated the pay back terms. This installation will be paid back in a short period and you will get a significant water saving as well.
Furthermore I know that mr John proposed, at the corporate level, to grant 6000 euro from the CAPEX 2013 for a new lubrication dosing system. Did you receive any feedback about that ?
Could we go ahead with this project ?
Best regards,
-------------------
Modifié par lucile83 le 14-05-2013 14:18
Réponse: Electro valve/ Capex de bluestar, postée le 14-05-2013 à 16:34:49 (S | E)
Hello..
Consumption of LUBRICANT is very high and I suppose that's due to the malfunction of the electrovalves in section 5 and 6 which are all the time open and the wrong time setting of electro valves 1; 2 and 3.
On my last visit report I proposed a new installation and I calculated the pay back payback terms. This installation will be paid back in a short period and you will get a significant water saving as well.
Furthermore I know that Mmr. John proposed, at the corporate level, to grant 6000 euro from the CAPEX 2013 for a new lubrication dosing system. Did you receive any feedback about that ?
Could Can we go ahead with this project ?
Best regards
Cours gratuits > Forum > Forum anglais: Questions sur l'anglais
